Category Technology/Electronics

Sangchul Roh, Dishit P. Parekh, Bhuvnesh Bharti, Simeon D. Stoyanov, Orlin D. Velev. 3D Printing by Multiphase Silicone/Water Capillary Inks. Advanced Materials, 2017; 1701554 DOI: 10.1002/adma.201701554

Using the principles behind the formation of sandcastles from wet sand, North Carolina State University researchers have achieved 3D printing of flexible and porous silicone rubber structures through a new technique that combines water with solid and liquid forms of silicone into a pasty ink that can be fed through a 3D printer. The finding could have biomedical applications and uses in soft robotics. Orlin Velev and coll

eagues show that, in a water medium, liquid silicone rubber can be used to form bridges between tiny silicone rubber beads to link them together – much as a small amo...

Novel Strategy for Photopatterning Emissive Polymer Brushes for Organic Light Emitting Diode Applications

From smartphones to TVs and laptops, light emitting diode (LED) displays are ubiquitous. OLEDs (where the O denotes they are organic, or carbon-based) are among the most energy efficient of these devices, but they generally have higher production costs due to the laborious fabrication processes needed to arrange them properly. Today in ACS Central Science, researchers introduce a new way to efficiently create patterns of OLEDs.

In an LED display, the emissions from red, green and blue diodes are blended to create the white and colored light necessary to render images. It is crucially important to precisely position the different types of diodes in relation to one another...

Flight paths for the 7km arc and line, followed from left to right. The star indicates the location of the ground station at Smith Falls{Montague Airport. The inner portions represent where the quantum link was active. Photo produced using GPSVisualizer.com, map data c 2016 Google, imagery c 2016 Cnes/Spot Image, DigitalGlobe, Landsat, New York GIS, USDA Farm Service Agency.

Researchers in Canada have taken a significant step towards enabling secure quantum communication via moving satellites, as announced by the Canadian Government in April 2017. Their study demonstrates the first quantum key distribution transmissions from a ground transmitter to a quantum payload on a moving aircraft...

Wavemeter setup: (a) Laser light is delivered into an integrating sphere (S) of diameter Dsphere, via an angled single mode fibre (SMF), where it undergoes numerous scattering events. A camera (C) located at a distance L from the integrating sphere observation port captures the speckle patterns. A wavemeter or Fabry–Perot interferometer (REF) is used to benchmark the speckle wavemeter. (b) An example of a speckle pattern captured by the camera at a wavelength of 780 nm with an image size of 512 × 512 pixels (with individual pixels of 4.5 × 4.5 μm2). The white scale bar denotes 200 pixels, and the colour bar shows the intensity in normalized units.

A breakthrough innovation in the measurement of lasers can measure changes one millionth of the size of an atom and could revolutionize...